SPECIFICATIONS

Brand Name: DayPlus

High-concerned chemical: None

Item Height: 38

Item Length: 42

Item Type: Car Jacks

Item Weight: 2

Item Width: 11

Origin: Mainland China

Type: Mechanical Jack

Specification:
Minimum height: appr. 110MM
Maximum height: appr. Lifting: 2T
Material: Steel
Net weight: 2KG
Scope: Suitable for small and medium sized vehicles.
Advantage: A young woman can use a jack alone to support the car tires, which is effortless and takes about one minute

Main Features:

✅ 2 Ton capacity: Heavy duty construction. The max lift height is approx.385mm/15 inch.

✅ Easy operate with Hexagonal wrench comes with the package.

✅ Compact design, light weight, easy to carry, easy to store.

✅ Ideal tire repair or changing tools for auto small and medium cars vehicles.

✅ High quality steel, long tool life.

Packing include:
1x Scissor jack
1x Hexagonal wrench

Attention:
1. Do not exceed rated capacity as designated by the height/capacity curve.(Sea below)
2. Use only on hard level surface.
3. Use for emergency tire changing only.
4. Never get beneath the vehicle when it is supported by the jack.
5. Activate the hazard warning flasher,turn off ignition, set parking
brake, move automatic shift selector to park position. In case of a
manual transmission, move gear selector into reverse position. In
addition, the wheel diagonally opposite from the wheel being lifted
shall be chocked in both directions.
6. Lift only on areas of the vehicle as specified by the vehicle manufacturer.
7. Follow tire changing procedure as per the vehicle manufacturer's owner's manual.
8. No alterations shall be made to this product.
HEIGHT/CAPACITY CURVE
This device is designed to sustain the following loads at these
specified heights. DO NOT EXCEED the rated capacity for each position.

OPERATIONS
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage
to the jack, do not move the jack while the handle is intact in the
socket.
3. To raise load, use one hand to hold the front part of the
handle and use the other hand to turn at the rear and of the handle
clockwise.
4. To lower load, use one hand to hold the front part of
the handle and use the other hand to turn at the rear and of the handle
counterclockwise slowly.